BlueSCSI (v2) For PowerBooks

BlueSCSI (v2) For PowerBooks

$30.00$50.00

BlueSCSI v2 for PowerBooks provides a convenient way to use MicroSD cards hard drives in your SCSI Compatible PowerBook! It comes as a fully assembled solution or kit!

For the kit builders: We’ve pre-soldered all of the surface-mount components for you. All you need to do is some through hole soldering and you’re done!

Just got your BlueSCSI? Start here for instructions, tips, tricks and more!

Please Note: Some PowerBook units will not properly fit the BlueSCSI with the included bracket. Double side tape is included for mounting in these situations.

Please Note: This unit is NOT compatible with PowerBooks using Internal IDE/ATA – like the 150, 190, 190cs, Duo 2300c/100, 1400 series, 2400 series and 5300 series. If you are unsure if your PowerBook has internal SCSI, check your system at the following link before ordering: https://everymac.com/systems/apple/powerbook/index-powerbook.html

SKU: BSPBv2 Categories: ,

Description

BlueSCSI provides a convenient way to use SD cards hard drives in your Vintage Macintosh! It comes as a fully assembled solution or kit!

Simple Design – Place a file on an SD card and go. Nothing to configure or setup.

Power Options – In most cases it is powered directly from the SCSI bus.

Performance – Synchronous Fast Mode up to 8MB/sec Read/Write on supported systems!

Compatibility – All PowerBooks that use internal SCSI –

  • It is NOT compatible with PowerBooks using Internal IDE/ATA – like the 150, 190, 190cs, Duo 2300c/100, 1400 series, 2400 series and 5300 series.
  • If you are unsure if your PowerBook has internal SCSI, check your system at the following link before ordering: https://everymac.com/systems/apple/powerbook/index-powerbook.html

BlueSCSI comes in three variants:

  • Fully Assembled. Assembled & tested. Just plug it in, write a file to a SD card and boot your Vintage Mac!
  • Build-It-Yourself-Kit comes with a pre-flashed & tested Raspberry Pi Pico along with all the parts you need to get it up and running – Just add an SD card and a Vintage Macintosh! You must be comfortable with through hole soldering. This is a good kit to test your skills in this area! If you are not comfortable soldering please choose a fully assembled kit.
  • Board Only: yeah, you can get just the PCB if you want.

Additional information

Weight 1.8 oz
Dimensions 4 × 2.75 × 0.75 in
Kit Type

Fully Assembled, Build-It-Yourself Kit, PCB Only