Pico Micro Mac (v3) – Audio Refit Kit

$12.25

Upgrades your Pico Micro Mac v3 unit to enable audio.

If you have one of the nifty v3 Pico Micro Mac units and want to upgrade to enable audio, pick up this kit, swap a couple of parts, and hear what you’ve been missing!
If you’re buying a v3 Pico Micro Mac today: you can upgrade it right here at checkout.

Includes a pre-flashed Raspberry Pi Pico 2 and Audio Hat. You can also have us solder the hat for you, or add an updated 3D printed case.

Do not purchase unless you already have a Pico Micro Mac v3 or you have one in your cart today! If you choose “Upgrade My Pico Micro Mac in the cart” but in fact do not have one in your cart, JCM will cancel and refund your entire order.

Source Code: https://github.com/TechByAndroda/pico-mac

Firmware: PWM_464_SD_firmware.uf2

86 in stock

Description

The Audio Header does not come soldered on by default. If you would like us to solder it in place for you, please select that option at checkout.

The new 3D printed case is the same footprint as the original case, however, it has accommodations for the audio port. If you would like this new case, select that option at checkout.

Do you have one of the original 3D printed cases? Your existing case will fit the new design: it just blocks the audio port. It should be possible if you like to modify your existing case to suit.

If you want to print your own updated case, print files can be downloaded here: Pico Micro Mac v3 plus Audio

How do I know what Pico Micro Mac I already have?

If your unit has a SD card socket on the base (not soldered onto the Pico unit), then it’s a v3.
If the Pico is upside down and covering the VGA port: it’s v2.
If the Pico hangs off the board by one row of pins: it’s v1.

Additional information

Weight	1.1 oz
Dimensions	3 × 2.25 × 1.1875 in

Size Chart

Pico Micro Mac: the world's smallest hardware Macintosh Emulator! Just add Keyboard, Mouse, Monitor and power, and you got a tiny little classic Macintosh box, ready to use!